ATF9337 Steel Helical Diff Ring/Pinion - BLX 3S 4S
$51.48
$51.48
Couldn't load pickup availability
Free shipping over 100$* Canada ⚡️
Free shipping over 200$* USA⚡️
*Except Oversize*
Real time inventory ⏱
Don't forget to click notify me for an out of stock product.
Hot Racing steel helical spiral 37T/13T gear set for Arrma 1/10 4WD
The 37T/13T gear set is the stock gear ratio.
- High carbon steel construction
- Stronger than the stock bevel Plastic gears
- Maintains the stock 37T/13T ratio
- One (1) 13 tooth spiral cut pinion gear
- Installation following kit manual
- Medium threadlock (e. g. blue Loctite) if screws are threaded into metal
- Hot Racing SPL10G05 high temp grease recommended for the diff gear.
- Use Silicone Diff Fluid for Gear Diffs inside.
- ARAC4023 you will only use the differ cover plate do not need to use the back plate.
The 37T/13T gear set is the stock gear ratio.
FEATURES:
- Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than the factory bevel cut gears- High carbon steel construction
- Stronger than the stock bevel Plastic gears
- Maintains the stock 37T/13T ratio
YOU WILL RECEIVE:
- One (1) 37 tooth diff spiral cut ring gear- One (1) 13 tooth spiral cut pinion gear
REQUIREMENTS:
- ARAC4023 Composite Diff case Cover Or ATF11A01 Aluminum Diff case Cover.- Installation following kit manual
- Medium threadlock (e. g. blue Loctite) if screws are threaded into metal
- Hot Racing SPL10G05 high temp grease recommended for the diff gear.
- Use Silicone Diff Fluid for Gear Diffs inside.
SPECIFICATIONS:
- Weight: 3.2oz (90g)COMMENTS:
- Replaces bevel-Plastic gears- ARAC4023 you will only use the differ cover plate do not need to use the back plate.
