ENVOI GRATUIT pour toutes les commandes de $100 et plus* info@zonehobbies.net 450-589-9120
0 Panier
Ajouter au panier
    Vous avez items en panier
    Vous avez 1 item en panier
    Total
    Procéder au paiement Continuer les Achats

    Cap 580 Matt Chapman FlatOut 3D EP ARF

     

    TECH NOTES
    This is a radio controlled, electric powered, foam
    Great Planes FlatOuts Matt Chapman CAP 580 3D Profile Park Flyer Airplane.
    Park Pilot Program Legal Aircraft
    For Intermediate to Advanced Modeler/Fliers.
    FEATURES: Construction: 1/8" (3mm) thick foam with carbon fiber reinforcing
    rods to strengthen the infrastructure
    Trim: Yellow with Blue, Orange, Green and Purple splatter marks
    Wings: 1/8" (3mm) thick foam with with carbon fiber leading edge
    and trailing edge reinforcement
    Landing gear: Carbon fiber rods and composite axle supports
    Wheel Pants: 1/4" (6mm) thick White foam construction
    Building Time: Flight ready in 2-3 hours
    Hardware: Carbon fiber pushrods and wing struts, clip-hinge system
    on tail section allows up to 80° of deflection without binding and
    also pops loose in the event of a crash
    Motor: T-370 size Brushed
    Gearbox: 5:1 gear ratio, ball bearing-supported
    Propeller: 10x3.8 Slo-Flyer with prop saver
    Warranty: Great Planes Model Manufacturing Company guarantees this
    kit free from defects in both materials and workmanship at
    the date of purchase.
    INCLUDES: Cap 580 foam construction 3D airplane, 370 size motor, 5:1 gearbox,
    10x3.8 Slo-Flyer prop, prop saver, carbon fiber rods and tubes,
    complete hardware package and photo-illustrated manual
    REQUIRES: Speed Control: 7+A continuous current
    Battery: 3S 350-700mAh Lithium Polymer (LiPo) battery
    **For optimum performance battery weight should not exceed
    2.3oz (65g).**
    Charger: Lithium Polymer capable
    Radio: 4-channel
    Receiver: Ultra micro size
    Servos: 3 micro with a 15+ oz-in minimum torque rating
    Misc. Items: Foam-safe CA, building and field equipment
    SPECS: Wingspan: 36" (915mm)
    Wing Area: 222 sq in (14 sq dm)
    Weight: 7.5 - 9oz (215 - 225g)
    Wing Loading: 4.9-5.8oz/sq ft (15-18g/sq dm)
    Length: 30.5" (770mm)
    Airfoil: Flat plate
    Center of Gravity: 2.25" (57mm) Back from the wing's leading edge
    at the fuselage sides.
    Control Throws:
    Function High rate endpoints High rate travel High rate exponential
    Aileron +/- 100% +/- 55-60° 40%
    Elevator +/- 100% +/- 55-60° 40%
    Rudder +/- 100% +/- 55-60° 40%
    Low rate endpoints Low rate travel Low rate exponential
    Aileron +/- 40% +/- 15-25° 0%
    Elevator +/- 40% +/- 15-25° 0%
    Rudder +/- 40% +/- 15-25° 0%
    Only one ultra micro receiver is required depending on the channel of
    the radio selected (Low band Ch 11-35, High band Ch 36-60). Please
    note the Accessory Completion Guide lists both Low and High band
    receivers. Channel selection is left to the modeler's preference.

    Sale

    Unavailable

    Sold Out