ENVOI GRATUIT pour toutes les commandes de $100 et plus* info@zonehobbies.net 450-589-9120
0 Panier
Ajouter au panier
    Vous avez items en panier
    Vous avez 1 item en panier
    Total
    Procéder au paiement Continuer les Achats

    AX90025 1/10 Yeti 4WD Kit

    TECH NOTES
    This is the 1/10 scale Electric Powered, Radio Controlled
    Yeti Rock Racer Kit from Axial.
    **Additional Technical Info Will Be Added When It Becomes Available.**
    FEATURES: Chassis: Plastic tub type with bolt-on 4 link mount for rear
    suspension,
    Drive: Four wheel, WB8 HD Wildboar 3-piece rear driveshaft with
    strengthened slider-floater tube, captured cross pin design
    eliminates older set screw design for greater durability and ease
    of maintenance
    Shocks: Icon aluminum body, oil filled
    Steering: Updated dual shear rack with full ball bearings and
    machined steel guide posts
    Transmission: Single speed with brushless motor gearing (2nd gear
    fixed), adjustable motor mount, 2-speed optional gear set will be
    available in the future
    Slipper Clutch: Dual design uses a pad on each side of spur gear for
    added surface area for more precise tuning and holding power
    Front Suspension: Independent design allows better control direction
    of travel ant high speeds when one side is adjusting to road
    obstructions
    Rear Suspension: AR60 rear solid axle, multiple tuning options, three
    upper link positions to adjust anti-squat, lower link mounts can be
    flipped to change roll center, long travel sway bar, aluminum lower
    link plates
    Front Bumper:
    Wheels: 2.2 Method IFD (interchangeable face design), black in color
    Tires: 2.2" (56mm) diameter Falken WildPeak R35 compound
    Receiver Box: Waterproof
    Body: Molded lexan, one-piece with separate roof, scale accessories
    molded grill, headlight buckets and hood vents, body attaches
    using multiple attachment points
    Battery Tray: Fully adjustable, accomodates most standard size 2S and
    3S LiPo batteries
    Driver Figure: Molded-in race suit with three interchangeable
    helmets, motocross, open skull-face or motorsport version
    INCLUDES: RTR Yeti Rock Racer with Body, Beadlock Wheels, Tires, Body
    Accessories, 3-Driver Helmets
    Instruction Manual
    REQUIRES: Radio: 2-channel with high-torque steering servo
    Motor:
    ESC: To match selected battery
    Battery: 2S or 3S LiPo pack with Dean's connector
    Battery Charger: To match selected LiPo Battery
    LiPo Charging Sack, Track and Maintenance Eequipment
    SPECS: Vehicle,
    Length: 19.5" (495mm)
    Width: 12.3" (312mm)
    Height: 7.7" (195mm)
    Wheelbase: 14.25" (360mm)
    Ground Clearance: 2" (50mm)
    Weight: 6.51lbs (2.9kg)
    Body,
    Length: 17.2" (437mm)
    Width: 7.3" (185mm)
    Height: 5.5" (140mm) including roof
    COMMENTS: For Replacement Ball Bearings use:
    Qty. Size Location Qty. Bearing Set
    2 10x15mm Front Hubs 1 DTXC1595
    2 5x11mm Front Hubs 1 DTXC1547
    2 10x15mm Front Gearbox 1 DTXC1595
    2 5x11mm Input Shaft 1 DTXC1547
    2 5x11mm Rear Diff 1 DTXC1547
    2 5x11mm Rear Axles 1 DTXC1547
    2 10x15mm Rear Diff 1 DTXC1595
    10 5x11mm Transmission 5 DTXC1547

    Sale

    Unavailable

    Sold Out