This is the 2.4GHz Radio Controlled, Brushless Powered             
      1/10 scale Ready to Run Senton 6S BLX Short Course Truck from Arrma.     
                    For Modelers 14 Years of Age and Older.                    
          The version of the Senton 6S BLX released in October 2017            
         (ARAD83LG) features the following differences and upgrades;           
       **New Larger Battery Tray w/Wire Routing Clip & area for Balance Plug** 
                 **Radio Box w/Rubber Wire Seals & Receiver Plate**            
        **Larger Diameter 0.16" (4mm) Shock Caps & New High Spring Perches**   
           **Additional Webbing Added to Bulkheads for Greater Strength**      
                **Stronger Servo Mount for Better Steering Feel**              
              **Updated Chassis Braces Attach Directly to Chassis**            
              **Lightweight Plastic Shock and Roll Bar Pivot Balls**           
        **Added Material Around Front Suspension Arms for Greater Strength**   
FEATURES: Chassis: 0.12" (3mm) thick aluminum, with side impact bumpers        
          Drive: Four wheel with CVD driveshafts                               
          Radio: Tactic TTX300 3-channel with user programmable 3rd channel,   
            steering rate adjustment, steering and throttle trim & end point   
            adjustments, 3-channel TR326 high voltage (7.4V) micro receiver    
            with failsafe, 70/30 throttle setting                              
          Steering Servo: ADS-15M metal geared with 208 oz/in torque,          
            .12 sec @ 60° transit speed                                        
          Motor: 2050kV brushless with 12T pinion gear                         
          ESC: Arrma BLX185 150A                                               
          Shocks: Aluminum body, oil filled, big bore, plastic top and bottom  
            caps and preload adjusters                                         
          Shock Towers: 0.20" (5mm) thick aluminum                             
          Suspension: Reinforced hangers with inboard hinge pins that are less 
            likely to pop out                                                  
          Body: Trimmed and painted                                            
          Motor Mount: Aluminum                                                
          Gearboxes: Fully sealed                                              
          Tires: dboots Sidewinder 2, 1.7" (44mm) wide, 4.2" (108mm) diameter  
            2.2"/3" mounting bead                                              
          Wheels: Plastic construction, black in color, 2.2" (56mm) outer      
            diameter, 1.6" (41.5mm) wide, 17mm hex                             
          Pinion Gear: Steel construction 12T Mod 1                            
          Camber: Adjustable front and rear, camber refers to the angle of the 
            tops of the tires from vertical when viewed from front or behind   
          Caster: Adjustable, caster/toe-in refers to the angle of the front   
            suspension when viewed from the side of the car in relation to     
            the chassis                                                        
          Warranty: Two year limited warranty beginning at date of purchase    
INCLUDES: RTR Senton 6S BLX Short Course Truck with 2.4GHz Radio, Brushless    
            Motor, ESC, Painted Body, Instruction Manual                       
REQUIRES: AA Batteries: Four for transmitter                                   
          LiPo Battery: Two 2-3S 5000mAh 35C minimum LiPo with XT90            
            connector, Duratrax 11.1V 5000mAh 35C batteries (DTXC1969)         
            recommended, or one 4-6S LiPo battery                              
          Battery Charger: To match selected battery                           
          LiPo charging sack, building & track equipment                       
SPECS:      Vehicle-                                                           
          Length: 22" (560mm)                                                  
          Width: 11.6" (295mm)                                                 
          Height: 7.67" (195mm)                                                
          Wheelbase: 12.5-12.67" (318-322mm)                                   
          Weight: 127oz (3.6kg)                                                
          Final Gear Ratio: 11.79                                              
          Pinion and Spur Gear Pitch: 1M                                       
          Maximum Battery Dimensions: 6.22 x 2.76 x 1.89" (158 x 70 x 48mm)    
          Length:  21.7" (552mm)                                               
          Width:    9.5" (242mm) behind front wheels, narrowest point          
                   12.4" (315mm) at rear wheels, widest point                  
          Height    5.5" (140mm)                                               
COMMENTS: The Senton 6S BLX Short Course Truck is available in the following   
            color scheme, Green/Black, ARAD83GL.                               
          For replacement ball bearings use:                                   
            Qty.  Size      Location        Qty.      Bearing Set              
             2   15x21mm  Fr Uprights        1         ARAC3162                
             2   8x16mm   Fr Uprights        1         ARAC3156                
             2   15x21mm  Rear Uprights      1         ARAC3162                
             2   8x16mm   Rear Uprights      1         ARAC3156                
             1   8x19mm   Fr Input Gear      1         ARAC3159                
             1   8x19mm   Ctr Input Gear     1         ARAC3159                
             1   8x16mm   Fr Diff            1         ARAC3156                
             1   8x16mm   Rear Diff          1         ARAC3156                
             1   5x11mm   Rear Gearbox       1         ARAC3150                
          The BLX185 ESC was set from factory to default to a LiPo battery     
          If any adjustments such as recalibration were made, check to see     
            that the battery mode has not been inadvertently set to NiMH mode. 
          Follow these steps to verify battery mode;                           
          1. Raise the vehicle chassis so that the wheels are not touching     
          2. With the battery or batteries charged and connected to the        
             vehicle's ESC leads, switch on the transmitter and then switch    
             on the vehicle. If a green LED flashes once the ESC is in LiPo    
             mode. If there is no LED flash on the ESC, and a pulsing noise    
             is made by the motor, the ESC is in NiMH mode. If you intend to   
             use LiPo batteries DO NOT operate ESC in NiMH mode, the           
             batteries may be damaged.                                         
          To switch ESC from NiMH mode to LiPo mode perform the following      
          1. Connect battery, switch on transmitter, press and hold set        
             button and turn on ESC. The red LED will flash.                   
          2. Keep holding set button until green LED flashes. The number of    
             flashes represents the variable number of attributes being        
          3. To enter the battery mode programming function, release the set   
             button when one green LED flashes.                                
          4. Press the set button to change battery mode between LiPo and      
             NiMH. One RED LED flash indicates ESC is set to LiPo mode.        
          5. To save setting, switch ESC off.


Sold Out