8JA 2.4GHZ S/FHSS w/R2008SB

TECH NOTES
This is the Futaba 2.4GHz S/FHSS 8JA Radio System
with the R2008SB S.Bus capable Receiver.
Does not include servos.
This is the airplane version which will default to airplane settings
when powered up and has a ratcheted throttle stick.
FEATURES: Futaba S-FHSS 2.4GHz security (also FHSS compatible)
Transfers model data wirelessly to and from one 8J to another
Capable of 4 channels only in FHSS mode
R2008SB receiver offers 8 PWM channels, S.Bus and HV capability and
Dual Antenna Diversity
Airplane and helicopter modes
20 model memory with 10 character model and user naming
Large backlit LCD display (128 x 64 dot)
8 channels (one varible knob, five 2-position switches,
two 3-position switches, one momentary switch and two digital
levers)
Failsafe on all 8 channels
Easy jog dial and three button programming
ATL
Aux channel switch/level assignability
One year limited warranty through Hobby Services beginning at date
of purchase
Airplane Mode Features;
6 Programmable Mixes Snap Roll
Flaperons with Differential Rate Elevator/Flap Mixing
Flap Trim Airbrake/Landing
Differential Ailerons Aileron/Rudder Mixing
V-Tail Mixing Flap/Elevator Mixing
Elevon Gyro Sensitivity
Ailevator Throttle Curve (five points)
Throttle Needle Mixing (five points) Throttle Delay
Idle Down (any switch selectable)
Helicopter Mode Features;
8 Swash Plate Types
5 Flight Conditions (normal, idle up 1, idle up 2, idle up 3, hold)
Throttle Curve (five points, five curves)
Throttle Hold
Hover Pitch Mixing
Hover Throttle Mixing
Gyro Sensitivity/Mixing
Governor Setting/Mixing
Hi/Lo Pitch Mixing
Offset Mixing
Condition Delay
Throttle mixing (swash>throtttle)
Throttle/Needle Mixing (5 point curve)
Swash AFR
Swash Mixing
Electronic Swash Ring
Throttle Delay
Revolution Mixing
6 Programmable Mixes
INCLUDES: 8J Transmitter
R2008SB 8-channel Receiver, FUTL7608
Neckstrap
On/Off Switch
Instruction Manual
REQUIRES: Four AA batteries for transmitter
Servos of modeler's choice
COMMENTS: To use the NiMH battery FUTM1473, you will need to purchase
charger FUTM1832. If you already have a charger and need a
If charge lead they can sell you part number- HSP29615.
(requires soldering on the correct charger plugs)