Free shipping 100$ and more*Contact us 450 589-9120
0 Panier
Ajouté au panier
    Vous avez items en panier
    Vous avez 1 item en panier
    Total

    UPDATED VERSION 2 OFFERS 8 CHANNELS OF CONTROL!

    To get the most radio for your money, check out the new 6K � an easy-to-program flight system with versatile functions that include telemetry, S.Bus/S.Bus2 compatibility and 30 model memory. With Version 2 updates, it's now a better value than ever. The NEW 6K is an 8-channel system with additional telemetry functions, expanded multicopter flight modes and much more.

    New in the 6K Version 2:

    • Channels 7/8 are used through the R3006SB receiver's S.Bus/S.Bus2 ports
    • Allow for expansions or adding accessories
    • Can be assigned to any of the four switches or VR dial
    • Are included in Sub Trims, End Points, Reverse, Failsafe, Servo Monitor and Trainer

    Priority � five flight modes on four channels

    • Channels 7/8 are used through the R3006SB receiver's S.Bus/S.Bus2 ports
    • Matrix � nine flight modes on four channels
    Vibration alerts with timer functions and Throttle Integrate
    SBS-01C current sensor and SBS-01V voltage sensor compatible
    • S-FHSS/T-FHSS selectable
    • Telemetry system (T-FHSS) sensors provide pertinent data on receiver battery voltage, external voltage, temperature, RPM, altitude and variometer
    • S.Bus/S.Bus2 servo setting functions programmable through the transmitter
    • 30 model memory
    • Model naming up to 8 characters
    • Programmable mixing for airplanes, helicopters, glider and multi-rotors
    • Digital trims with variable step settings
    • Switch/VR position change and AUX channel function change
    • Throttle position warning
    • Software is updateable through the CIU-2
    • 128x64 DOT backlit LCD screen with adjustable display contrast
    • Alarms can be preset to vibration mode
    • Conveniently located Earphone/Trainer/S.Bus jacks
    • Adjustable stick length and tension
    • The R3006SB receiver can use S.Bus as the main link/communication to the servos or a combination of S.Bus and the conventional outputs together
    Futaba R3006SB S.Bus2 6Ch T-FHSS Telemetry Receiver


    The included R3006SB receiver has six standard PWM ports plus S.Bus and S.Bus2 ports. You can use S.Bus as the main link to your servos or a combination of the ports. The S.Bus2 port allows bi-directional communication with T-FHSS Futaba air transmitters and the use of a wide array of telemetry sensors.
    Futaba 6K 6-Channel Heli Radio System - Program navigation
    Program navigation is easy and intuitive with the jog dial, +/- pads and end pad.
    Futaba 6K 6-Channel Heli Radio System - antenna
    The antenna is inside the transmitter case for safety and handling convenience.
    Futaba 6K 6-Channel Heli Radio System - variable rate dial
    This variable rate dial can be programmed to perform different functions; a speaker allows for telemetry voice feedback and audio alarms.
    Futaba 6K 6-Channel Heli Radio System - switches
    Four assignable switches (three 3-position and one 2-position) offer maximum flexibility.
    Futaba 6K 8-Channel Air Computer System w/R3006SB Receiver - Programming
    6K Version 2.01 multicopter programming has been expanded with five Priority and nine Matrix flight conditions.
    Futaba 6K 8-Channel Air Computer System w/R3006SB Receiver - Flight Conditions
    The nine Matrix flight conditions can be used to set up a tilt camera by assigning nine settings to two 3-position switches.
    Futaba External Voltage Telemetry Sensor
    Futaba SBS-01C Current Telemetry Sensor
    Using an SBS-01V External Voltage Telemetry Sensor and SBS-01C Current Telemetry Sensor, the 6K collects real time telemetry data for motor current, battery voltage and capacity. (not included)

    System Features

    • Airplane, Helicopter, Glider and Multicopter programming.
    • S-FHSS/T-FHSS selectable.
    • Telemetry system (T-FHSS) with data speech (via earphones) function for monitoring receiver battery voltage, external voltage, temperature, RPM, altitude and variometer, current, capacity and voltage.
    • Built-in antenna (Full Range).
    • S.Bus/S.Bus2 servo setting functions programmable through the transmitter.
    • Preset vibration alarms.
    • 30 model memory.
    • 8-character model/user naming.
    • Programmable mixes (3-normal, 1-curve) for airplanes, helicopters, gliders and multi-rotors.
    • Digital trims with variable step settings.
    • Adjustable stick length and tension.
    • Changeable switch/VR position and AUX channel function.
    • Throttle position warning.
    • Backlit 128x64 DOT LCD screen with adjustable display contrast.
    • Software updateable through the CIU-2 or CIU-3 interface units.
    • Screen Lock.


    • Assignable switches (three 3-position, one 2-position).
    • Range Check.
    • Program navigation bay with jog dial, +/- pads and end pad.
    • Data reset.
    • Model copy.
    • Selectable model type.
    • Fail Safe.
    • End Points.
    • Trim/Trim Resets/Trim Steps.
    • Sub Trim.
    • Servo Reversing.
    • Parameter functions.
    • Servo monitor/Test.
    • Wireless model data transfer (to other T6K transmitters).
    • Timer-System and Model (Up/Down/Down-Stop/THR Integrate) w/Vibration Alert.
    • Trainer system.
    • Power Saver.

    Airplane Functions

    • Wing Type (5-wing, 2-tail).
    • Throttle Cut.
    • Dual Rate/Expo.
    • Throttle Curve.
    • Idle down.
    • Gyro.
    • Aileron differential.
    • V-Tail.
    • Camber.
    • Air Brake.
    • Elevator-to-Flap mixing.
    • Flap-to-Elevator mixing.
    • Elevon mixing.

    Helicopter Functions

    • Swash type (6).
    • Condition Select.
    • Throttle Cut.
    • Dual Rate/Expo.
    • Trim Offset.
    • Delay.
    • Gyro mixing.
    • Swash AFR.
    • Swash mixing.
    • Throttle Curve (5-point).
    • Pitch Curve (5-point).
    • Pitch-to-Rudder mixing.
    • Throttle Hold.
    • Hovering throttle.
    • Hovering pitch.

    Glider Functions

    • Wing Type (5-Wing, 2-Tail).
    • Condition select.
    • Dual Rate/Expo.
    • Motor switch.
    • Gyro.
    • Aileron Differential.
    • V-tail.
    • Butterfly mixing.
    • Trim mixing.
    • Elevator-to-Camber mixing.
    • Camber mixing.
    • Aileron-to-Camber mixing.

    Multicopter Functions

      • Flight Mode (Priority Flight Conditions and Matrix Flight Conditions).
      • Center alarm.
      • Dual Rate/Expo.
      • Throttle Curve.
      • Throttle Delay.
      • Gyro.

    Six Languages

    • English.
    • German.
    • French.
    • Spanish.
    • Italian.
    • Dutch.
    Notes from our tech department:
    This is the Futaba 2.4GHz 6K Helicopter Radio System
    with the R3006SB T-FHSS SBUS, SBUS2 Receiver.
    Servos and Sensors Not Included.
    This is the helicopter version which will default to heli settings
    when powered up and does not have a ratcheted throttle stick.

    The 6K is more versatile than ever, thanks to Version 2 firmware that adds
    two morechannels. This makes it possible for the 6K to accept additional
    accessories, including optional SBS-01C and SBS-01V telemetry sensors that
    gather real-time data for motor current, battery voltage and capacity. Other
    new features include expanded Multicopter flight modes and a unique "Throttle
    Integrate" option that links the timer speed to throttle position. Download
    the V2 firmware now to get the most out of your 6K!

     

     

     

    FEATURES

    Telemetry system (T-FHSS) with data speech (via earphones) provides
    data on receiver battery voltage, external voltage, temperature
    RPM, altitude and variometer, current, capacity and voltage
    (sensors not included and must be purchased separately, see
    COMMENTS below)
    S.Bus/S.Bus2 servo setting functions programmable through transmitter
    R3006SB receiver can use SBus as the main link/communication to
    servos, or a combination of SBus and conventional outputs together
    Programmable mixing (3-Normal, 1-Curve) for airplanes, helicopters
    gliders and multi-rotors
    Four assignable switches, three 3-position and one 2-position
    Switch/VR position change and AUX channel function change
    Updateable software through the Futaba CIU-2 USB PC Interface, or
    CIU-3 Interface, not included

    Airplane Functions;
    Wing Type (5-wing, 2-tail)
    Throttle Cut
    Aileron Differential
    Dual Rate/Expo
    V-Tail
    Throttle Curve
    Camber
    Idle Down
    Air Brake
    Gyro
    Elevator to Flap Mixing
    Flap to Elevator Mixing
    Elevon Mixing

    Glider Functions;
    Wing Type (5-wing, 2-tail)
    Condition Select
    Butterfly Mixing
    Dual Rate/Expo
    Trim Mixing
    Motor Switch
    Gyro
    V-Tail
    Elevator-to-Camber Mixing
    Aileron to Camber Mixing
    Aileron Diffrential
    Camber Mixing

    Helicopter Functions;
    Swash Type (6)
    Condition Select
    Throttle Cut
    Dual Rate/Expo
    Trim Offset
    Delay
    Gyro Mixing
    Swash AFR
    Swash Mixing
    Throttle Curve (5-point)
    Pitch Curve (5-point)

    Pitch to Rudder Mixing
    Throttle Hold
    Hovering Throttle
    Hovering Pitch

    Multicopter Functions;
    Flight Mode
    Center Alarm
    Dual Rate/Expo
    Throttle Curve
    Throttle Delay
    Gyro

    Wing Type (5-Wing, 2-Tail)
    Throttle Cut
    V-Tail
    Camber
    Dual Rate/Expo
    Camber
    Throttle Curve
    Airbrake
    Idle Down
    Gyro
    Aileron Differential
    Elevon Mixing
    Elevator to Flap
    Flap to Elevator

    Transmitter also compatible with S-FHSS receivers
    30 model memory, model naming up to 8 characters
    Auxiliary channel
    Parameter functions
    Servo monitor/test
    Throttle position warning
    Wireless model data transfer
    Timer-system & model (Up/Down/Down-Stop) with vibration alert
    Trainer system
    Fail safe
    End points
    Built-in full range antenna
    One year limited warranty through the Futaba Service Center
    beginning at date of purchase

     

     

    INCLUDES

    Futaba 2.4GHz 6K Helicopter Transmitter
    R3006SB Receiver, FUTL7683
    Switch Harness

     

     

    REQUIREMENTS

    AA Batteries: Four for transmitter
    Servos and sensors of modeler's choice

     

     

    SPECIFICATIONS

    Transmitter;
    Transmitting Frequency: 2.4GHz band
    System: T-FHSS Air, S-FHSS switchable
    Power Supply: Four AA batteries
    Receiver;
    Power Requirement: 4.8V~7.4V battery or regulated output from ESC
    Size: 1.7 x 0.98 x 0.35 " (43.1 x 25.0 x 8.8 mm)
    Weight: 0.3 oz. (8.5g)
    Battery: F/S Voltage

    Sale

    Unavailable

    Sold Out