ENVOI GRATUIT pour toutes les commandes de $100 et plus* info@zonehobbies.net 450-589-9120
0 Panier
Ajouter au panier
    Vous avez items en panier
    Vous avez 1 item en panier
    Procéder au paiement Continuer les Achats

    45104-1 1/10 Nitro Sport SE 2.4 RTR

    This is the Traxxas Nitro Sport Ready-to-Run 1/10 scale Stadium Race Truck
    with the 2.4GHz Traxxas TQ Pistol Grip Radio
    and On-Board Push Button EZ Start System.
    This kit is based on the Nitro Rustler.
    **The included TQ 2.4GHz radio system is compatible only with the**
    **#6519 receiver and does NOT accept the Docking Base accessory.**
    FEATURES: (RTR) Ready To Run with radio system installed
    Traxxas TQ 2.4GHz radio with waterproof digital high-torque
    steering servo, waterproof receiver box
    T-6 flat aluminum chassis rear and black fiber composite front
    Countersunk holes under the chassis
    Fiber composite upper plate/front brace
    4 composite oil-filled Ultra shocks with white powder coated springs
    4-wheel independent suspension
    Telescoping U-joint drive shafts
    281 Magnum, 6 (5x11mm) ball bearing transmission with adjustable
    slipper clutch and planetary gear differential with steel internal
    75cc fuel tank with flip-top lid and primer bulb
    Adjustable turnbuckle tie-rods
    Composite black tuned pipe with pressure fitting
    Disc brake (composite)
    Fiberglass front hinge pin brace (tie bar)
    Five color ProGraphix painted body with bolt-on wing
    Twin Spoke 2.2" wheels
    Alias dual pin rear tires and ribbed fron tires with foam inserts
    Single point steering
    Black colored composite parts
    Front and rear bumpers
    Pre-installed servo saver on servo
    Black composite cover for the receiver and receiver battery box
    Servo reversing and trim on radio
    Air filter (one stage, bell shaped)
    Ballon type receiver cover
    2.5 ounce (75cc) fuel tank with rubber mount cushions
    Pre-painted polycarbonate body with rear spoiler
    Push button EZ start system with battery and 2-amp DC Peak
    Detecting Fast Charger that starts the engine with an on-board
    2-shoe clutch system
    TRX Pro.15 engine w/ round alum heatsink (non-anodized) head
    foam bell type air filter, ball bearings, short crankshaft,
    ABC construction, easy adjust two needle carburetor,
    on-board electric motor start system and glow starter,
    starter, tuned pipe, glow plug, metal throttle arm,
    aluminum piston with oil groove, channeled beam conecting rod
    SPECS: Length: 17.27" (439mm)
    Front track: 12-1/2" (318mm)
    Rear track: 12-3/8" (314mm)
    Weight: 62 ounces (without radio)
    Height: 6" (152mm)
    Wheelbase: 11.313" (287mm)
    Wheel diameter: 2.2"
    Fuel capacity: 2.5 ounces (75cc)
    Engine: TRX Pro.15
    Gear ratio: Adjustable 8.43:1 to 12.64:1
    Differential: Planetary gear type (not ball)
    Brake: Disc
    Chassis: Double-decked (aluminum and composite)
    Spur gear: 70 black nylon tooth (32 pitch)
    Clutch bell: 20 tooth black steel (32 pitch)
    Castor block front 30 degrees
    INCLUDES: One TQ 2.4GHz pistol grip radio
    One Nitro Sport assembled with TRX-Pro .15 and two glow plugs
    One Pre-Painted ProGraphix Body and Spoiler
    One Decal sheet
    One EZ start module with battery and DC powered charger
    One Black plastic shock collars and pistons
    One Antenna tube and cap
    Six 5x11mm ball bearings in transmission
    Eight 5x11mm metal bushings for wheels
    Two 5x10mm bearings for clutch
    One Extra receiver cover balloon
    One Instructions
    One Window mask sheet
    One fuel bottle
    REQUIRES: Eight "AA" batteries, four for transmitter, four for battery box
    COMMENTS: For ball bearings use:
    8- 5x11mm for wheels (DTXC1549 10 pack)
    6- 5x11mm for transmission
    2- 5x10mm for clutch (DTXC1535 2 pack)
    Optional ball differential TRAC4420 and slipper clutch TRAC9615
    Available in the following colors;
    Blue, TRAC14BB Red, TRAC14RR
    Black, TRAC14LL Silver, TRAC14SS
    To convert the EZ-Starting system to a standard pull-starter,
    purchase TRAG4070 take out the three bolts on the EZ-Starter,
    and install recoil starter.



    Sold Out