ENVOI GRATUIT pour toutes les commandes de $100 et plus* info@zonehobbies.net 450-589-9120
0 Panier
Ajouter au panier
    Vous avez items en panier
    Vous avez 1 item en panier
    Procéder au paiement Continuer les Achats

    41094-1 Nitro Stampede RTR w/Radio

    This is the glow powered, radio controlled Ready-To-Run
    Traxxas Nitro Stampede 1/10 scale Monster Truck.
    **The included TQ 2.4GHz radio system is compatible only with the**
    **#6519 receiver and does NOT accept the Docking Base accessory.**
    FEATURES: Chassis: 6061 T-6 aluminum anodized blue
    Radio: Traxxas TQ 2.4GHz
    Engine: Traxxas Pro .15 (2.5cc) with two-needle rotary carb, glow
    plug and EZ-Start electric starter with battery and charger
    Exhaust: Composite construction rear tuned pipe with two outlets
    Drive: Rear wheel
    Body: Pre-painted, pre-cut polycarbonate body with decals applied
    Ball Bearings: Full set included, rubber sealed
    Shocks: Four Ultra shocks oil-filled w/ powder coated White springs
    Slipper Clutch: Adjustable
    Suspension: 4-wheel independent
    Transmission: Magnum 375 with 32 pitch gears and ball bearings
    Differential: Planetary gear with steel internal gears
    Spur Gear: 66-tooth composite construction
    Clutch Bell: 18 tooth steel
    Fuel Tank: 2.5oz (75cc) with flip-top lid and primer bulb
    Brake: Composite disc type
    Tires: Revo spec Talon 2.8" (71mm) inner diameter 4.75" (121mm) outer
    diameter with foam inserts
    Wheels: Chrome finish 5-spoke Traxxas All Star 2.8" (71mm) diameter,
    2.0" (51mm) wide
    Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when viewed from the side of the car in relation to the
    Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind vehicle
    INCLUDES: Assembled Nitro Stampede with Pro .15 (2.5cc) engine and glow plug,
    EZ-Start electric starter, painted body with decals, TQ 2.4GHz
    radio two servos, instruction sheet, 66-tooth spur gear, 18-tooth
    clutch bell, battery and 110V charger for EZ-Start
    REQUIRES: "AA" Batteries: 8 (4 for transmitter and 4 for receiver)
    Fuel: Car fuel with 10-15% nitromethane content
    Misc. Items: Fuel bottle and building and track equipment
    SPECS: Length: 17" (432mm)
    Front and Rear Track: 12.75" (324mm)
    Weight: 5.2lb (2.35kg)
    Height: 9.5" (241mm)
    Wheelbase: 10.75" (273mm)
    Ground Clearance: 4" (102mm)
    Gear Ratio: 3.75:1 (internal)
    COMMENTS: For Replacement Ball Bearings use:
    Qty. Size Location Qty. Bearing Set
    4 5x11mm Front Wheels 2 DTXC1547
    4 5x11mm Rear Wheels 2 DTXC1547
    6 5x11mm Transmission 3 DTXC1547
    2 5x11mm Clutch Bell 1 DTXC1547
    To convert the EZ starting to a standard pull starter, purchase
    part numbers TRAG5170, TRAP5211 one-way bearing, four 3x8mm machine
    screws, take out the three bolts on the EZ-Starter clip the wires
    on the EZ-Starter, and install recoil pull starter.
    Available with the following color schemes
    Blue, TRAD30BB Silver/Blue, TRAD30SB
    Red, TRAD30RR Silver/Red, TRAD30SR
    jxs 10/31/14
    BOX DIMENSIONS: 14.13" W. X 11.00" H. X 20.63" L.
    BOX WEIGHT: 9.24 LBS.
    This is the RTR Traxxas Nitro Stampede 1/10 scale Monster Truck.
    FEATURES: 6061 T-6 aluminum anodized blue chassis, Traxxas Pro .15 engine W/EZ-
    START electric starter, adjustable slipper clutch & disc brake, oil shocks,
    battery & charger for EZ-START, TQ 2.4GHz radio
    REQUIRES: 8 AA Batteries, building & track equipment



    Sold Out