What is the box?
- (1) Ezrun MAX10 ESC
- (3) 14 AWG, 200C Black wires for a brushless motor
- (1) Double side tape
- (2) Heat shrink tube
- User's manual
- A HOBBYWING decal
- ESC is compatible with both sensorless and sensored brushless motors (only in sensorless mode).
- Fully waterproof design for all conditions.
- Super internal switch-mode BEC with switchable voltage of 6V/7.4V for usage with high torque and high voltage servos.
- Motor Thermal Protection: It will be available after you plug the temperature monitoring cable on the ESC into the temperature monitoring port (marked with “TEMP”) at the bottom of the matching HOBBYWING motor.
- Highly reliable electronic switch design prevent mechanical switch failure due to dirt, water, dust and etc.
- Separate programming port to easily connect the LED program card or the LCD program box to the ESC.
- Proportional brake with 9 levels of maximum brake force and drag brake force.
- 5 levels of acceleration/punch from soft to aggressive for different vehicles, tires and tracks.
- Capacitor Protection:Innovative Capacitor Protection effectively protects capacitors from exploding and causing irreversible damage to the ESC from overloading. • Multiple protections: motor lock-up protection, low-voltage cutoff protection, thermal protection, overload protection, and fail safe (throttle signal loss protection). • Single-button ESC programming and factory reset.
- Advanced programming via portable LED program card, multifunction LCD program box or WiFi module.
- Firmware upgrade via HOBBYWING multifunction LCD program box or WiFi module (item sold separately).
|Scale Vehicles||1/5th||1/6th, 1/7th||1/8th||1/10th||1/10th|
|200A/1300A||160A/1050A||150A/950A||120A/830A||60A / 450A|
|Input||9-24 Cells NiMH，
|9-24 Cells NiMH，
|9-18 Cells NiMH
6-12 Cells NiMH
6-9 Cell NiMH
(3656 Series of Motors)
2S LiPo/ 6S NiMH: KV≤6000
3S LiPo/ 9S NiMH: KV≤4000
(3652 size motor)
|6V/7.2V adjustable, 6A||6V/7.2V adjustable, 6A||6V/7.4V Switchable, Continuous Current of 4A (Switch-mode)||6V/7.4V Switchable, Continuous Current of 3A (Switch-mode)|
|FAN/PRG Port||FAN/PRG Port||FAN/PRG Port||FAN/PRG Port||FAN/PRG Port|
|ESC Programming||Via the SET button/LED Program card /LCD Program Box/ WiFi Module||Same||Same||Same||Same|
|Switch Mode||Electronic Switch||Same||Same||Same||Same|