ENVOI GRATUIT pour toutes les commandes de $100 et plus* info@zonehobbies.net 450-589-9120
0 Panier
Ajouter au panier
    Vous avez items en panier
    Vous avez 1 item en panier
    Total
    Procéder au paiement Continuer les Achats

    106168 Sprint 2 Flux BMW M3 GT2 Body RTR

    TECH NOTES
    This is the 1/10 scale, brushless electric powered, 2.4GHz radio controlled,
    RTR HPI On-Road Sprint 2 Flux Touring Car with the BMW M3 GT-2 Body.
    FEATURES: Chassis: 3/16" (4mm) plastic
    Drive: Four wheel belt drive
    Motor: HPI Flux Vektor 5900kV brushless (not 3S LiPo compatible)
    Radio: 2-channel HPI TF-11 2.4GHz, SF-10W waterproof steering servo
    and four AA transmitter batteries
    Electronic Speed Control: Waterproof HPI Flux Vapor, LiPo compatible
    and fully prgrammable with the USB Programming Kit (not included,
    order HPIC0573)
    Ball Bearings: Full set, rubber sealed
    Shocks: Oil-filled, plastic bodied
    Differentials: Planetary gear, sealed
    Transmission: Single speed with Flux optimized gearing
    Tires: HPI X-Pattern Racing Tire 1.02" (26mm) width, 1.9 (49mm)
    diameter
    Rear, 1.2" (31mm) width, 1.9" (48mm) diameter
    Wheels: Rays Volk TE37 six spoke black 1.9" (48mm) diameter, 1.02"
    (26mm) wide
    Pinion Gear: Steel 48 pitch
    Spur Gear: 48 pitch, composite construction
    Body: Polycarbonate painted and trimmed with body trim and light
    details and clear plastic windows, matte black finish rear wing
    Bumpers: Front, foam
    Suspension: Fully adjustable, extra long upper links with new
    multiple mounting positions, and adjustable droop
    Ackerman: Adjustable, Ackerman describes the effect of the inner
    front wheel turning faster than the outer front wheel during turns
    Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when viewed from the side of the car in relation to the
    chassis
    Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind vehicle
    Steering: Bearing supported bell-crank type with servo saver
    INCLUDES: HPI On-Road Sprint 2 Touring Car with the BMW M3 GT-2 Body, Flux
    Vapor ESC, Flux Vektor 5900kV brushless motor, body, wing, 4 AA
    TX batteries, 2.4GHz radio w/waterproof steering servo, decal
    sheet, and instruction manual
    _
    REQUIRES: Battery: 7.2V NiMH stick pack with Dean's connector
    Battery Charger: To match selected battery
    Misc. Items: Building and track equipment
    SPECS: VEHICLE-
    Length: 17" (431mm)
    Width: 7.5" (190mm)
    Height: 5" (127mm)
    Weight: 2.7lbs (1245g)
    Wheelbase: 10" (254mm)
    Front Track: 7.4" (187mm)
    Rear Track: 7.7" (196mm) side to side at outer edges of wheel
    Front Tread: 6.3" (160mm)
    Rear Tread: 6.6" (169mm) side-to-side at wheel centers
    Ground Clearance: 0.35" (9mm)
    BODY-
    Length: 17.4" (442mm)
    Width: 7.5" (190mm)
    Height: 4.6" (117mm)
    COMMENTS: For Replacement Ball Bearings use:
    Qty. Size Location Qty. Bearing Set
    4 5x10mm Fr Wheels 2 DTXC1535
    4 5x10mm Rear Wheels 2 DTXC1535
    2 5x8mm Fr Diff 1 DTXC1523
    2 5x8mm Rear Diff 1 DTXC1523
    2 10x15mm Fr Diff 1 DTXC1595
    2 10x15mm Rear Diff 1 DTXC1595
    1 4x8mm Spur Gear Mount 1 DTXC1511
    2 4x8mm Servo Saver 1 DTXC1511
    2 4x8mm Middle Lay Shaft 1 DTXC1511
    Body pictured on the box is painted white with all body trim and
    sponsor decals applied.

    Sale

    Unavailable

    Sold Out