ENVOI GRATUIT pour toutes les commandes de $100 et plus* info@zonehobbies.net 450-589-9120
0 Panier
Ajouter au panier
    Vous avez items en panier
    Vous avez 1 item en panier
    Total
    Procéder au paiement Continuer les Achats

    1/18 MT4.18 RTR 2.4GHz w/Battery & Charger


    TECH NOTES
    This is the Electric Powered, Radio Controlled, 1/18 Scale
    RTR MT4.18 Monster Truck from Dromida.
    FEATURES: Chassis: Plastic tub
    Drive: Four wheel, shaft driven
    Motor: M370 super high-speed brushed
    Radio: 2-channel 2.4GHz radio system with trims and dual rates, and
    2-in-1 waterproof ESC/receiver, waterproof steering servo
    Battery: 7.2V 1300mAh NiMH
    Battery Charger: AC wall type
    Suspension: Fully adjustable independent
    Shocks: Oil-filled big bore composite body, with multiple mounting
    locations
    Bumpers: Flexible plastic, front and rear
    Ball Bearings: Full set
    Body: Printed and trimmed
    Tires and Wheels: Rubber tires with offroad tread, gray plastic
    wheels, width: 1.2" (29.5mm), outer diameter 2.5" (65mm), hex size
    0.31" (8mm)
    Caster: Non-adjustable, caster/toe-in refers to the angle of the
    front suspension when viewed from the side of the car in
    relation to the chassis
    Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind vehicle
    Warranty: Ninety day limited beginning at date of purchase
    INCLUDES: RTR MT4.18 Monster Truck with 2.4GHz Radio, Brushed Motor,
    Printed Body, four AA Batteries, 7.2V Battery, AC Wall Charger,
    Instructions
    SPECS: Vehicle;
    Length: 10.6" (270mm)
    Width: 7.5" (190mm)
    Height: 4.3" (110mm)
    Gear Ratio: 10.4:1
    Body;
    Length: 9.8" (250mm)
    Width: 3.7" (95mm)
    Height: 2.5" (65mm)
    COMMENTS: For Replacement Ball Bearings use:
    Qty. Size Location Qty. Bearing Set
    2 8x12mm Fr Diff 1 DTXC1581
    2 8x12mm Rear Diff 1 DTXC1581
    2 6x10mm Driveshaft 1 DTXC1561
    1 8x12mm Driveshaft 1 DTXC1581
    4 8x12mm Front Uprights 2 DTXC1581
    4 8x12mm Rear Uprights 2 DTXC1581
    For increased speed Dromida offers a Brushless Conversion Kit
    (DIDC1150) that includes a Brushless Motor, 25A ESC and other
    upgraded components. The Dromida 2S 7.4V 1600mAh Battery
    (DIDC1134) is recommended for best results and highest speed with
    this conversion kit.
    **Do NOT use LiPo battery with stock ESC. The stock ESC does not have
    Low Voltage Cutoff, and will damage the LiPo battery.

    Sale

    Unavailable

    Sold Out