The SPEC RACE COMBO
(Zero Timing)
for 1/10, 1/12 Pro Racer, Oval, Club Spec

Advantages:

Budget-friendly yet professional performance, best control feelings.
Timing is permanently set to zero degrees (unchangeable) for SPEC race.

*Waranty only applicable at Hobbywing directly* *Garantie Applicable chez Hobbywing seulement*

Esc Spec

Zero timing firmware for ROAR SPORTMAN races and other fair races.
World's Smallest footprint & Lightweight ESC ever. "28g"
Innovative Double-switch Design: Built-in Electronic Switch, long life, and high reliability saves space on the chassis + Switch w/ extended wire (option)
Programming/Upgrading/ Data Reading Wirelessly: Integrated Data logger can record the maximum temperature of ESC and motor as well as the maximum RPM. WiFi Express Module or LCD Programming box can be used to check data easily in the pits. External Programming Port (EPP) is easy to connect and functions as a power port for an additional fan.
Adjustable Throttle & Brake PWM Frequencies: Independent and adjustable throttle & brake PWM frequencies guarantee precise and accurate throttle and brake control for all classes of competitions (esp. the Stock class).
Super Internal BEC: The built-in switch mode BEC with a maximum output of 6A and voltage adjustable between 6V and 7.4V allow the user to use various high voltage servos.
Multi Protection Functions makes running your ESC safe with ESC and Motor overheat protection, low voltage cutoff and throttle signal loss protection.
Easily programmed with the Wifi Express programming module, Multifunction LCD Program Box, and USB Link Software.

XR10 Stock Spec ESC	Xerun STOCK Spec ESC
	30112401	30112400
Current	Continuous: 80A Burst: 380A	Continuous: 100A Burst: 600A
Battery	5-7 cells NiMH/NiCd 2S LiPo	4-9 cells NiMH/NiCd 2-3S LiPo
Built-in BEC	6V@3A (switch mode)	6V@3A (linear mode)
Motor Supported	Sensored and sensorless brushless motors
Suitable Motor	3650 Motors 1/10 Touring Cars ≥10.5T, 1/10 Buggy≥13.5T	3650 Motors 2S LiPo: 1/10 Touring Cars≥4.5T, 1/10th Buggies≥6.5T 3S LiPo: 1/10 Touring Cars≥6.5T, 1/10th Buggies≥10.5T
Application	STOCK class of 1/10th Touring Car & Buggy Racing	1/10,1/12 all competitions 1/10,1/8 rock crawler
Cooling Fan	5V - 7.4V (20x20x8mm)	5V - 8.4V (25x25x10mm)
Wires	14AWG-200mm	12AWG-200mm
Size	31.5x25.6x16.1mm	37.5x31.0x32.0mm
Weight**	28g	32.6g
* For 7-9 cells NiMH/NiCd or 3S LiPo, the standard cooling fan must be changed to 12V high voltage fan. ** Weight is w/o wires, cooling fan

Motor Spec

DESIGN matters. It’s a motor specially designed for Extremely High-Level Racing. The RMP of G3 Stock motor is significantly improved, the KV & torque are improved by 16% and 4% respectively, compared with the V10 G2 Stock motor.

Lightweight. The G3 Modified & Stock motors only weigh 161g & 132g respectively, the weights are reduced by 11% & 21% when compared with the previous generation G2 motors.
The built-in high precision Hall sensor combined with the high precision and balanced rotor guarantee outstanding linearity of the motor.
The mechanical timing can be adjusted finely and smoothly; the skid-proof lines on the rear end plate of the motor guarantee the stability of the timing after adjustment. For G3 Stock motors (10.5T~25.5T), the timing is adjustable from 30 degrees to 60 degrees; for Modified motors (3.5T~8.5T), the timing is adjustable from 20 degrees to 50 degrees.
The motor case is designed to be easy to dismantle for maintenance purposes and for the replacement of common wearing parts.
The special shell design which makes the stator core expose to the air maximizes cooling. Big holes on the end plates of 10.5T~21.5T motors further help reduce heat; small holes on the end plates of 5.5T~8.5T motors effectively keep sand or dirt from getting inside and damaging the motor(s).
The use of high-performance stator core, heat(200℃)-resistant wire, heat(200℃)-resistant rotor with strong structure, imported high precision and high strength bearings, and copper solder tabs with super current endurance guarantees outstanding performance and super durability.
It’s compliant with IFMAR, ROAR, EFRA, BRCA rules, and certificated by RoHS, CE, FCC

3.5T, 4.5T, 5T	Modified Class of 1/10th & 1/12th On-road Racing
5.5T, 6T, 6.5T	Modified Class of 1/10th 4WD Off-road Racing
6.5T OnRoad Spec	Modified Class of 1/12th On-road Racing
7T, 7.5T, 8T, 8.5T	1/10th Drift, 2WD Off-road Racing
10.5T	1/10th Drift, 1/10th STOCK Class On-road, Off-road
13.5T, 17.5T	1/10th STOCK Class Racing
21.5T, 25.5T	1/10th STOCK Class Racing, Rock Crawler

Modified motors (3.5T-8.5T)

2 POLE Super High-Efficiency brushless motor
Diameter/Length (mm): Ø=35.9mm L=51.2mm
Shaft Diameter/ Length (mm): Ø=3.17mm L=13.3mm

p/n	T	kv	LiPo	(Ω)	No-load Current (A)	Max. Output Power (W)	Current @Max. Output Power (A)	Stock Rotor	Weight (g)
30401106	3.5	9450	1S	0.0018	7.7	462	126	Φ5-12.1	163
30401102	4.5	7340	2S	0.0029	6.7	457	122	Φ5-12.3	163
30401116	5	6500	2S	0.0035	5.5	443	118	Φ5-12.3	159
30401107	5.5	5900	2S	0.0041	5	426	115	Φ5-12.5	163
30401117	6	5500	2S	0.0048	4.5	415	113	Φ5-12.5	162
30401109	6.5	5120	2S	0.0056	3.9	402	113	Φ5-12.5	164
30401123	6.5 OnRoad	6300	2S		7.4	428	107	5-12.5	150
30401118	7	4800	2S	0.0065	3.5	364	106	Φ5-12.5	161
30401110	7.5	4420	2S	0.0074	3.3	346	100	Φ5-12.5	161
30401119	8	4200	2S	0.0089	3.0	320	88	Φ5-12.5	160
30401111	8.5	3970	2S	0.0097	2.8	298	84	Φ5-12.5	163

STOCK motors (10.5T-25.5T)

10.5T- 21.5T

2 POLE Super High Efficiency brushless motor
Diameter/Length (mm): Ø=35.9mm L=51.2mm
Shaft Diameter/ Length (mm): Ø=3.17mm L=13.3mm

25.5T

Diameter/Length (mm): Ø=35.9mm L=51.2mm
Shaft Diameter/ Length (mm): Ø=3.17mm L=13mm

p/n	T	KV	LiPo S	(Ω)	No-load Current (A)	Max. Output Power (W)	Current @Max. Output Power (A)	Stock Rotor	Weight (g)
30401112	10.5	4500	2-3	0.0158	5.5	260	74	Φ7.3-12.5 -U	133
30401103	13.5	3710	2-3	0.0251	4.5	216	59	Φ7.3-12.5 -U	133
30401104	17.5	2830	2-3	0.0402	3.9	152	42	Φ7.3-12.5 -U	131
30401105	21.5	2250	2-3	0.0645	2.8	118	32	Φ7.3-12.5 -U	135
30401113	25.5	1500	2-3	0.1055	1.6	79	23	Φ7.3-12.3 -U	154

Manuals & Support

XERUN V10 G3 Brushless Motor Manual

XR10 Stock Spec ESC (2S-3S) Manual

HOBBYWING electronics

Contact us