ASC80939 RC8B3.2 Team Kit

$819.99 CAD
$819.99 CAD
Free shipping over 100$* Canada ⚡️
Free shipping over 200$* USA⚡️
*Except Oversize*
Real time inventory ⏱
Don't forget to click notify me for an out of stock product.

Features

  • Suspension arm design with inserts for flex adjustments
  • Longer rear suspension arm length with narrow rear arm mounts
  • Center bulkhead splits and has front/rear specific top halves to prevent brake misalignment
  • Enclosed battery box for quick and easy battery removal
  • Larger receiver box for better wire management
  • One-piece graphite transponder and electronic switch mount
  • Flex Control radio tray has three different configurations for chassis flex adjustment
  • Stiff shock bladder design improves jumping and handling performance
  • Updated shock cap works for bladder or emulsion style shock setups
  • Shorter and lower front bumper reduces drag and allows easier access to anti-roll bar screws
  • I.F.M.A.R. approved rear wing
  • 42T ring and 12T pinion gears on front and rear differentials for improved gear ratios
  • Updated chassis with chamfered front edges to reduce drag
  • Side guards are now threaded into the chassis from the top side of the car
  • 90% parts compatibility with RC8B3.1

  • Overview

    1:8 scale nitro off road racing is one of RC's most challenging disciplines of racing - it requires attention to detail and demands the highest of standards from equipment. Here to answer the call is the latest development from Team Associated's Area 51 Design Works, the RC8B3.2 Team Kit! The RC8B3.2 is set to push the boundaries of the accolades accumulated by the RC8B3.1:

    • 2018 I.F.M.A.R. World Championship, Perth, Australia — Davide Ongaro
    • 2019 ROAR National Championship, Hutto, Texas — Spencer Rivkin
    • 2019 RCGP Series Championship — Davide Ongaro
    • 2019 Italian Nitro Championship — Davide Ongaro

    The engineers of Area 51 Design Works focused on key components that improved durability, accelerated maintenance, and expanded upon its race-winning heritage within the RC8B3 platform. Suspension arm design improves performance in all conditions: bottom-loaded inserts adjust flex characteristics and longer overall length, with reduced rear arm mount width. A 4-piece center bulkhead allows for easier access to the center differential, making adjustments even faster.

    The radio tray design features an enclosed battery box, a larger receiver box, integrated switch and transponder mounting, and adjustable flex configurations. Updated shock caps allow the RCB3.2 to be run with the included stiff bladders, standard bladders, or as emulsion with no bladders—all with the same cap. The RC8B3 platform was born with Team Associated "Champion by Design" heritage and the RC8B3.2 plans to continue dominating the 1:8 scale off road racing scene!

    Due to ongoing R&D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: engine, pipe and header, transponder, servos, receiver, wheels, tires. Assembly and painting required.

    Needed to Complete
    • .21 class rear exhaust engine
    • Exhaust system: muffler and header joining pack, or muffler spring
    • 2 or 3 channel radio/transmitter set with switch - FM/PCM/2.4GHz recommended
    • Transmitter batteries
    • 4.8-7.4v receiver battery
    • Flat style NiMH, OR Flat style LiPo (Reedy LiPo Pro TX/RX 2400mAh 7.4v Flat), OR Flat style LiFe (Reedy LiFe Pro TX/RX 1600MAh 6.6v Flat)
    • Model car fuel (20-30% nitro recommended)
    • Fuel bottle
    • Glow igniter
    • Starter box
    • 1:8 scale buggy tires
    • 1:8 scale buggy wheels
    • CA (cyanoacrylate) glue
    • Polycarbonate-specific spray paint or polycarbonate-specific bottled paint and airbrush
    • Thread-locking compound
    • Steering servo
    • Throttle servo
    • Silicone Shock Fluid
    • Silicone Diff Fluid
    • Tools needed: Needle-nose pliers, Hobby knife, Reamer or hole punch for making holes in body, Ride height gauge, Body Scissors, Hex wrenches, Nut drivers, Wire Cutters, Calipers or a Precision Ruler
    • Silicone Shock Fluid, Silicone Diff Fluid, Shock Shaft Pliers, 5pc Hex/Nut Driver Tool Set, Dual Turnbuckle Wrench, Tire Adhesive
    What's in the Box?
    • (1) Team Associated RC8B3.2 Team Kit
    • (1) Product Manual
    Suspension 

    Longer rear suspension arm length with narrow rear armmounts

     

    Bulkheads 

    Center bulkhead splits and has front/rear specific tophalves to prevent brake misalignment

     

    Receiver Box 

    Larger receiver box for better wire management

     

    Side guards 

    Side guards are now threaded into the chassis from the topside of the car

     

    Battery Box 

    Enclosed battery box for quick and easy battery removal

     

    Suspension Arm Design 

    Suspension arm designed with inserts for flex adjustments

     

    Shock Caps 

    Updated shock cap works for bladder or emulsion styleshock setups

     

    Pinion Gears 

    42T ring and 12T pinion gears on front and rear differentialsfor improved gear ratios

     

    Bladder Design 

    Stiff shock bladder design improves jumping andhandling performance

    Specs
    Ball Bearings Full set
    Battery 4.8 - 7.4V receiver battery (sold separately)
    Body Clear polycarbonate with IFMAR approved rear wing
    Bushing Material Metal
    Charger Required for receiver battery (sold separately)
    Chassis Aluminum
    Completion Level Kit
    Differential Front, rear and center
    Drivetrain 4WD
    Engine Size .21 cu in (sold separately)
    Power Type Glow
    Max Battery Dimensions 3.3 x 1.8 x 0.65 in (84.5 x 29.8 x 16.5mm)
    Motor Type Glow
    Product Length 19.13 in (486mm)
    Product Width 11.99 in (304.5mm)
    Radio 2-3 channel (sold separately)
    Receiver Sold Separately
    Scale 1/8
    Servos High-torque steering servo required
    Shock Type Oil-filled, updated shock cap works for bladder or emulsion style shock setups
    Speed Control Sold Separately
    Suspension New arm design features bottom-loaded inserts
    Vehicle Type Buggy
    Water-Resistant Yes
    Wheelbase Varies
    Wheel Hex Size 17mm
    Wheel Type 1:8 scale buggy wheels (sold separately)